Solar Guppy Discussion Forum http://solar-guppy.com/forum/ |
|
Fishbowl vs GT-view http://solar-guppy.com/forum/viewtopic.php?f=11&t=447 |
Page 1 of 1 |
Author: | mike90045 [ Fri Aug 11, 2006 1:29 pm GMT EthGMT ] |
Post subject: | Fishbowl vs GT-view |
Getting a new GT3.8 and powered it up briefly yesterday. verified the serial cable works, and GTview runs, but it does not display all the goodies that fishbowl does. Is fishbowl compatable with GT series? Something newer than the 2003 version of fishbowl? logged ouput follows Xantrex Performance Logger Version 1.6.0 ... © 2004 www.solar-guppy.com Inverter Infomation Model = GT3.8-NA-240 Xbus ID = 302244 Serial Number = **** Firware Revisions Bootloader = 01.00.03 Main = 02.04.00 Xbus = 01.02.04 Protect = 02.02.00 Inverter Logged Performance Data Date Time VDC DC Amps MPPT DC Pwr AC Pwr Eff VAC AC Wh HS Tmp Freq SAC Pwr SAC kWh Status 08-10-2006 14:04:50 276.400 13.100 275.900 3637 3451 94.89 237.0 244 99 60.0 3452 246 ST:3 STS:0000 0000 0010 8010 FA:00 08-10-2006 14:04:59 276.400 13.100 276.600 3639 3451 94.83 237.0 254 99 60.0 3455 252 ST:3 STS:0000 0000 0010 8010 FA:00 While the Tmp is logged, it's not reported on the GT-View. Would it show on the Fishbowl?? |
Author: | Solar Guppy [ Fri Aug 11, 2006 4:25 pm GMT EthGMT ] |
Post subject: | |
GT-View displays the heat sink tempature, same as FishBowl The GT3.x series do not have ambient sensors like the Suntie, make sure you have not enabled system mode, as that does disable one of the tech panels so both unit and system values can be displayed |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |