Solar Guppy Discussion Forum
http://solar-guppy.com/forum/

Fishbowl vs GT-view
http://solar-guppy.com/forum/viewtopic.php?f=11&t=447
Page 1 of 1

Author:  mike90045 [ Fri Aug 11, 2006 1:29 pm GMT EthGMT ]
Post subject:  Fishbowl vs GT-view

Getting a new GT3.8 and powered it up briefly yesterday. verified the serial cable works, and GTview runs, but it does not display all the goodies that fishbowl does. Is fishbowl compatable with GT series? Something newer than the 2003 version of fishbowl?

logged ouput follows

Xantrex Performance Logger Version 1.6.0 ... © 2004 www.solar-guppy.com

Inverter Infomation
Model = GT3.8-NA-240
Xbus ID = 302244
Serial Number = ****

Firware Revisions
Bootloader = 01.00.03
Main = 02.04.00
Xbus = 01.02.04
Protect = 02.02.00

Inverter Logged Performance Data
Date Time VDC DC Amps MPPT DC Pwr AC Pwr Eff VAC AC Wh HS Tmp Freq SAC Pwr SAC kWh Status
08-10-2006 14:04:50 276.400 13.100 275.900 3637 3451 94.89 237.0 244 99 60.0 3452 246 ST:3 STS:0000 0000 0010 8010 FA:00
08-10-2006 14:04:59 276.400 13.100 276.600 3639 3451 94.83 237.0 254 99 60.0 3455 252 ST:3 STS:0000 0000 0010 8010 FA:00

While the Tmp is logged, it's not reported on the GT-View. Would it show on the Fishbowl??

Author:  Solar Guppy [ Fri Aug 11, 2006 4:25 pm GMT EthGMT ]
Post subject: 

GT-View displays the heat sink tempature, same as FishBowl

The GT3.x series do not have ambient sensors like the Suntie, make sure you have not enabled system mode, as that does disable one of the tech panels so both unit and system values can be displayed

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/