Solar Guppy - All Things Solar Forum

It is currently Sun Nov 10, 2024 3:44 pm GMT EthGMT

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: Fishbowl for Linux?
PostPosted: Fri Jul 08, 2005 9:05 am GMT EthGMT 
Has anybody mentioned this?

I'm not only leaving the grid, but M$ as well <g>

Will give the transfer a shot if you're interested.

Dave


Top
  
 
 Post subject:
PostPosted: Fri Jul 08, 2005 10:06 am GMT EthGMT 
Offline
Red Cobra Delta Guppy
Red Cobra Delta Guppy
User avatar

Joined: Sun Jun 02, 2002 1:01 am GMT EndGMT
Posts: 1159
Location: Lakeland Florida
If your leaving the grid your Suntie won't be in use as it is a GridTie inverter , no grid , no power. So makes the issue of the OS a non-issue


Top
 Profile  
 
 Post subject: Mis-spoke
PostPosted: Sat Jul 09, 2005 9:01 am GMT EthGMT 
Leaving as in 'lack of dependance'; not complete disconnection.

Keeping a good comm link is really a much bigger issue for me.


Top
  
 
 Post subject: Re: Fishbowl for Linux?
PostPosted: Fri Aug 11, 2006 12:46 pm GMT EthGMT 
Offline
Guppy
Guppy
User avatar

Joined: Fri Aug 04, 2006 10:24 am GMT EthGMT
Posts: 284
Location: Los Angeles
dspeed wrote:
Has anybody mentioned this?

I'm not only leaving the grid, but M$ as well <g>

Will give the transfer a shot if you're interested.

Dave


Have you tried the s/w under WINE windows emulator for linux? I too am bailing on MS products and don't have my GT system inspected yet, haven't had a chance to run any s/w testing.

_________________
"Since the dawn of time it has been mankind's dream to blot out the sun"
Montgomery Burns


Top
 Profile  
 
 Post subject: Anyone working on Linux?
PostPosted: Mon Oct 02, 2006 7:05 pm GMT EndGMT 
Offline
Fish Eggs
Fish Eggs

Joined: Mon Oct 02, 2006 5:46 pm GMT EndGMT
Posts: 1
Location: San Jose, CA
This thread (and a couple of others here) show there is a small amount of interest in monitoring using a Linux host. Has anyone started work yet? Like others I have a Linux box that is on all the time that would be ideal to handle the data collection.

Installation at my house is likely to begin in a couple of weeks. I'm getting a pair of Sunpower SPR-3300x invertors (which are apparently re-badged Xantrex inverters). The limited information on the Sunpower site gives me some hope that the rs232 connections and protocols might be the same.

One question on opto-isolation & Xantrex ... the fishbowl info page still has the "absolute requirement that you purchase and install an opto-isolator", but in this thread Solar guppy said "<i>The CPU's are isolated from all the inverter electronics internally so from a protection stand point, the RS232's are effectively isolated and no I do not use another level of isolation and never had issues, even in lightning capital of the US here in Florida</i>". So did things change with newer Xantrex invertors?

_________________
-Tony


Top
 Profile  
 
 Post subject:
PostPosted: Mon Oct 02, 2006 8:27 pm GMT EndGMT 
Offline
Red Cobra Delta Guppy
Red Cobra Delta Guppy
User avatar

Joined: Sun Jun 02, 2002 1:01 am GMT EndGMT
Posts: 1159
Location: Lakeland Florida
FishBowl is for the Suntie , Sold from 1998-2003. Yes you have to use an opto for FishBowl, and it only runs on Windows

Your confusing this with GT-View ( and it's related resellers, IE , GE/Sunpower ect) for the Xantrex GT-3.* inverters. which also only runs on windows. the GT-View is RS-232 based and the commands are published.

Suntie needs opto , GT opto is part of the Xantrex design so an external opto is not required.

If you have questions about GT-View, please post in the GT-View forum

SG


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
cron
Powered by phpBB © 2000 - 2020 phpBB Group

phpBB SEO

© SGT 2002 - 2020 Solar Guppy