Solar Guppy Discussion Forum
http://solar-guppy.com/forum/

GT-View 1.6 and 1.8 Peak AC "Limited"
http://solar-guppy.com/forum/viewtopic.php?f=15&t=464		 Page 1 of 1
Author:  ajrollo [ Mon Sep 18, 2006 2:44 pm GMT EthGMT ]
Post subject:  GT-View 1.6 and 1.8 Peak AC "Limited"
Using both GT-View versions 1.6 and 1.8, I have seen the Peak AC "limited" to 3499 even though the Inverter Watts and Daily Logs show sustained AC Watts as high as 3815. The incorrect lower number is recorded in the Daily Totals. Has anyone seen this? Can this be corrected by changing a configuration file? I have a new Xantrex GT3.8.
Author:  Solar Guppy [ Mon Sep 18, 2006 3:19 pm GMT EthGMT ]
Post subject: 
Yes,

This is a "bug" with GT-View. GT-View was written for the GT3.0 and was coded to limit the peak to 3500 watts, which was 500 watt over the rated inverter

Xantrex Has since released newer models and with the GT3.8 has exposed this limit

I have posted a "Beta" version , http://www.solar-guppy.com/forum/viewtopic.php?t=450

Please note:

This is the actual GT-View program NOT an installer. Follow the instruction under the Beta Version link to install manually the Beta Program. If you find problems or have issues questions, please make a new topic with your concerns

SG
Author:  brenor [ Sat Jun 16, 2007 8:50 pm GMT EthGMT ]
Post subject: 
I'm running the 1.9 beta version with a Sunpower SPR-4000x inverter. It appears that this setup still has the 3,499 bug. The log file shows today's peak at 3,773 but the image has it as 3,499.
Author:  mike90045 [ Sat Jun 16, 2007 10:12 pm GMT EthGMT ]
Post subject:  Re: GT-View 1.6 and 1.8 Peak AC "Limited"
Odd, it's been working fine for me. Perhaps check the file actually wrote over the older .exe file ?
Author:  brenor [ Sun Jun 17, 2007 12:26 am GMT EthGMT ]
Post subject: 
The help screen shows "Version 1.9". Do you also have the Sunpower inverter? I was thinking, one way to fix the original bug might be:

Code:
limit = 3499; // this is the old limit
If (inverter == GT 3.8) then
  limit = 4000; // fix it for the bigger inverter


In this case its only fixed for "GT 3.8" and it might not recognize the "SPR-4000X" even though they are basically the same.
Author:  mike90045 [ Sun Jun 17, 2007 2:46 am GMT EthGMT ]
Post subject: 
I won't buy that, because the inverter at http://www.sbcmd.com/solar/ often runs over 4K, and folds back at 4200watts input [DC Current limit] and it's a SPR-4000x
Author:  Solar Guppy [ Sun Jun 17, 2007 11:06 am GMT EthGMT ]
Post subject: 
Please download GT-View 1.9 again. The verison you grabbed was not 1.9 ( if you do propertys and then version info you will see its 1.8.1 on the version you have now )

Files got moved around and causes the mix-up!
Author:  brenor [ Sun Jun 17, 2007 2:16 pm GMT EthGMT ]
Post subject: 
Fixed it, thanks. The properties on the old file also said 1.9.0.1, but after the change its working now.
Author:  mike90045 [ Fri Aug 03, 2007 3:58 pm GMT ErdGMT ]
Post subject:  GT view versions
I see the s/w page has:

1.9.2 (Beta)
1.9 (Beta)

The file for D/L is listed as 1.9 Is the 1.9.2 ready yet ?


Also, SG - I see you have your inverters back on the 'net and they are cranking away.
Author:  Solar Guppy [ Fri Aug 03, 2007 4:38 pm GMT ErdGMT ]
Post subject: 
The download is 1.9.2 though the link just says 1.9

Yes all three inverters are cranking, doing about 60kw/day right now

FishBowl_Current_East.png
FishBowl_Current_West.png
FishBowl_Current_Pool.png

Yeah, file names are a "bit" dated ... oh well :wink:
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/