| Solar Guppy Discussion Forum http://solar-guppy.com/forum/ |
|
| SMA: SB600U pin description of communications connectors http://solar-guppy.com/forum/viewtopic.php?f=19&t=471 |
Page 1 of 1 |
| Author: | bzublin [ Fri Oct 20, 2006 9:01 pm GMT EthGMT ] |
| Post subject: | SMA: SB600U pin description of communications connectors |
I posted this on the SMA forum but did not receive any replies, so I thought I would try here: I am looking for the SB6000U pin descriptions for the two connectors that the RS232 & RS485 interface boards plug into. I would like to make my own interface & RS232 extender to my PC. Power for the interface will be provided from the PC side and optocouplers will be used to isolate the PC side from the SB6000U. I am an electrical engineer so I do have experience with these types of interfaces. Any help on the pin outs would be appreciated. Are service manuals / schematics available? If I can't get the pinouts, then I will most likely have to buy the SMA interface card and reverse engineer it. Bryan Zublin |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|