| Solar Guppy Discussion Forum http://solar-guppy.com/forum/ |
|
| Status Byte http://solar-guppy.com/forum/viewtopic.php?f=19&t=830 |
Page 1 of 1 |
| Author: | SBsite [ Tue Apr 12, 2011 12:07 pm GMT EthGMT ] |
| Post subject: | Status Byte |
reference ST:3 STS:0000 0000 0008 90fa FA:00 does ST:3 = status online? if so how does 0, and 4 translate |
|
| Author: | SBsite [ Wed Apr 13, 2011 11:25 am GMT EthGMT ] |
| Post subject: | Re: Status Byte |
I am recording data from 7 inverters at a solar test site in Seal Beach Ca. I have 4 PV power, 2 SMA, and one Xantrex. Thus far I have been able to get my labview program to read the data from the PVP and SMA but not the Xantrex. I did make a work around for xantrex. By running SG VIEW and reading the data log using labview I can get everything but status and total KWH. I get inverter status using the first few characters from the status string which I guessed to mean; ST:3= Online, ST:0= Waiting, ST:4= Sleeping. Did I guess correctly? Also, is there a way to make SG VIEW record KWH total? |
|
| Author: | Solar Guppy [ Wed Apr 13, 2011 2:16 pm GMT EthGMT ] |
| Post subject: | Re: Status Byte |
The extended status was not documented by Xantrex, so can't help on that Been some time, but I'm pretty sure the unit reported lifetime kWr is not accessible via the RS232 command set |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|