| Solar Guppy Discussion Forum http://solar-guppy.com/forum/ |
|
| SUN-120 Panel http://solar-guppy.com/forum/viewtopic.php?f=3&t=767 |
Page 1 of 1 |
| Author: | jzadroga [ Sun Jun 14, 2009 10:10 pm GMT EthGMT ] |
| Post subject: | SUN-120 Panel |
I have been looking at the SUN-120 Panel. Its price is pretty good but is it a good panel or a substandard one. Does anyone have a comment or opinion? here is the link to the product.http://sunelec.com/index.php?main_page=product_info&products_id=245 |
|
| Author: | Snailster [ Mon Sep 07, 2009 4:09 am GMT EthGMT ] |
| Post subject: | Re: SUN-120 Panel |
Same question here: Sunelec.com has Sun 130 (M) for $1.98/W - $257. Anybody's got any experience with "Sun" panels? I googled the heck out of it, but can't find anything about the company. |
|
| Author: | Dapdan [ Sun Nov 15, 2009 11:25 am GMT EthGMT ] |
| Post subject: | Re: SUN-120 Panel |
Hey all, I order some or the samae sun-130 to resell. I had them hooked up through a C40 in parallel with my Kyocera 130 and they worked fine no problem. The panel build was acceptable with no immediate cause for concern. The wire box a the back of the panel was well build and totally sealed and only needed a flat tip screw driver to open it. My only improvement on the panel would be to make the space around the screw on the connector block bigger so spade or circular end terminal could fit into the space and have the connector block connected more securely to the circuit board so when you tighten it does not flex or posibly break off. All in all i was happy with the buy and so were the people who eventually bought them from me. Cheers... Damani |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|