Hi

I noticed that pvoutput.org stopped uploading at 11:10 today. Coinciding around that time is a DC Power entry of 5120 see below. The SG-View on the eeePC had an error of Maximum Power Reached or something similar I didn’t think to get a screen shot.

The reading on the inverter says I produced 11.261 kWh of power today which seems right based on the weather and generation up to 11:10am and confirmed by SG-View. Just there’s rubbish logs from 10:59 until 11:07 when it stops. Any ideas on why the upload stopped??

9/09/2011 10:59:03 378.8 9.21 380.4 3530 3390 96.03 243.6 6046 39 50 ST:3 STS:0000 0000 0008 90da FA:00
9/09/2011 10:59:15 384.1 8.82 382.9 3405 3275 96.18 243.3 6061 39 50 ST:3 STS:0000 0000 0008 90da FA:00
9/09/2011 10:59:27 382.4 10.54 381.9 4004 3835 95.78 243.9 6070 39 50 ST:3 STS:0000 0000 0008 90da FA:00
9/09/2011 10:59:39 400.4 13.22 394.8 5120 4880 95.31 246.2 6087 39 50 ST:3 STS:0000 0000 0008 90da FA:00
9/09/2011 10:59:55 416.2 12.73 410.9 3 5021 99.9 246.5 6106 39 5392.3 V:410.9 TD:0 PL:1
9/09/2011 11:00:07 399.9 11.49 399.5 3 4415 99.9 244.8 6116 40 5389.7 V:399.5 TD:0 PL:0
9/09/2011 11:00:19 401 8.6 397.5 53 3233 99.9 243.9 6132 40 387.9 V:397.5 TD:0 PL:0
9/09/2011 11:00:31 394 8.33 393.3 53 3178 99.9 242.7 6140 40 387 V:393.3 TD:0 PL:0

I have a Xantrex GT5 inverter.

EDIT: The problem was with the upload not maximum power reached.

Cheers
Rick