AGM max voltage limit? : All Things Hardware For Solar Installations

View unanswered posts | View active topics

Board index » System Componets » All Things Hardware For Solar Installations

All times are UTC - 5 hours [ DST ]

AGM max voltage limit?

Moderator: Solar Guppy

Page 1 of 1

[ 3 posts ]

Print view

Previous topic | Next topic

Author

Message

Frank

Post subject: AGM max voltage limit?

Posted: Tue Jan 13, 2004 3:52 pm GMT EthGMT

Minnow

Joined: Sun Nov 03, 2002 2:01 am GMT ErdGMT
Posts: 20
Location: Maine

What would you folks suggest for a max voltage limit for this type of battery? i.e. the voltage at which it's no longer safe to charge the battery? There's a software limit in the SW4024 for this. I'm using Concorde batteries but haven't seen anything on their web site and they haven't responded to my email.

TIA

Top

Solar Guppy

Post subject: AGM max voltage limit?

Posted: Wed Jan 14, 2004 10:25 pm GMT EthGMT

Red Cobra Delta Guppy

Joined: Sun Jun 02, 2002 1:01 am GMT EndGMT
Posts: 1159
Location: Lakeland Florida

The Short answer is use wet lead-acid values

Concorde Web Specs

From Concordes web-site:

<BLOCKQUOTE><font size="1" face="Verdana, Helvetica, sans-serif">quote

Quote:

Charging Instructions: Initial charge or recharge - 2.37 to 2.40 volts per cell at 25 C (77 F). Float charge - 2.23 volts per cell at 25 C (77 F). Equalize charge - 2.40 volts per cell at 25 C (77 F). Temperature compensation - Â±3.75 mV. per cell per degree C [Reference to 25 C (77 F)]. This is for battery temperature (not ambient temperature) and is useful for battery temperatures from 0 C to 40 C.

Battery FAQ

[ 01-14-2004: Message edited by: Solar Guppy ]

Top

Frank

Post subject: AGM max voltage limit?

Posted: Fri Jan 16, 2004 3:43 pm GMT EthGMT

Minnow

Joined: Sun Nov 03, 2002 2:01 am GMT ErdGMT
Posts: 20
Location: Maine

Hi,

Thanks for the reply. I have those numbers and have been using them, but I read in a HomePower article ("Blackout Buster") where they limited the absolute voltage to 29 VDC on AGM's (33 VDC for wet cells) and was trying to understand their reasoning a bit more (i.e. high-voltage-cutout). I've got mine set to 31 VDC and it doesn't crash during charge cycles, so I guess that'll have to do.

Top

Page 1 of 1

[ 3 posts ]

Board index » System Componets » All Things Hardware For Solar Installations

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 8 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum