Solar Guppy - All Things Solar Forum

It is currently Thu Mar 28, 2024 6:48 pm GMT EthGMT

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: newbie questions
PostPosted: Fri Nov 04, 2011 7:13 pm GMT EthGMT 
Offline
Fish Eggs
Fish Eggs

Joined: Tue Jan 17, 2006 2:53 pm GMT EthGMT
Posts: 5
Sorry if these questions are too simple, but I'm a bit new at this.

1) Why do grid tie inverters shut down when the utility goes away? I understand the idea of islanding but it seems to me that one can isolate an inverter from the utility grid but allow it to continue to supply power to a house.

2) How does adding a battery to a GT inverter work? (Is this then a "hybrid" inverter?) I know the battery can supply power to the inverter for conversion to AC (and not endanger workers when the utility is down) but do the PV panels supply power to the inverter directly, for conversion to AC, or do they charge the battery only, or both?

TIA


Top
 Profile  
 
 Post subject: Re: newbie questions
PostPosted: Mon Nov 07, 2011 5:06 pm GMT EthGMT 
Offline
Guppy
Guppy
User avatar

Joined: Fri Aug 04, 2006 10:24 am GMT EthGMT
Posts: 284
Location: Los Angeles
Quote:
1) Why do grid tie inverters shut down when the utility goes away?...


It's a code requirement. UL 1741 IIIRC.

Quote:
2) How does adding a battery to a GT inverter work? (Is this then a "hybrid" inverter?) I know the battery can supply power to the inverter for conversion to AC (and not endanger workers when the utility is down) but do the PV panels supply power to the inverter directly, for conversion to AC, or do they charge the battery only, or both?


You cannot add a battery to a GT inverter, you need a hybrid inverter (XW6048) and a charge controller.


Top
 Profile  
 
 Post subject: Re: newbie questions
PostPosted: Mon Nov 07, 2011 5:43 pm GMT EthGMT 
Offline
Fish Eggs
Fish Eggs

Joined: Tue Jan 17, 2006 2:53 pm GMT EthGMT
Posts: 5
mike90045 wrote:
You cannot add a battery to a GT inverter, you need a hybrid inverter (XW6048) and a charge controller.


When the utility shuts down, what does the XW6048 do? Will it supply the household load, or just charge the batteries?

What's a good reference for an overview, including schematics showing panels, charge controllers, etc? Can't find anything on the Xantrex website.


Top
 Profile  
 
 Post subject: Re: newbie questions
PostPosted: Tue Nov 08, 2011 10:55 am GMT EthGMT 
Offline
Guppy
Guppy
User avatar

Joined: Fri Aug 04, 2006 10:24 am GMT EthGMT
Posts: 284
Location: Los Angeles
If you are using only a XW6048 & a battery bank, it will switch over (has it's own internal transfer switch) from Pass-Through / Charge mode, and into INVERT mode. You won't even see the computer screen blink. Like a giant UPS.

Bur figure an average house is pulling/using 2Kw of power (200 amp service can supply 48Kw to a house) and the inverter can only produce 6Kw. You need to have the inverter only feed your critical loads (kegerator, the aunt's Iron Lung, coffee pot)
The batterys will last __ depending on your loads and battery bank size. You can add charging from a 240V generator (AC2 input) or from solar with a charge controller wired to the batteries

When the Grid returns, the Invert stops, and battery charge (from the grid) resumes


Top
 Profile  
 
 Post subject: Re: newbie questions
PostPosted: Tue Nov 08, 2011 5:05 pm GMT EthGMT 
Offline
Fish Eggs
Fish Eggs

Joined: Tue Jan 17, 2006 2:53 pm GMT EthGMT
Posts: 5
mike90045 wrote:
If you are using only a XW6048 & a battery bank, it will switch over (has it's own internal transfer switch) from Pass-Through / Charge mode, and into INVERT mode. You won't even see the computer screen blink. Like a giant UPS.

Bur figure an average house is pulling/using 2Kw of power (200 amp service can supply 48Kw to a house) and the inverter can only produce 6Kw. You need to have the inverter only feed your critical loads (kegerator, the aunt's Iron Lung, coffee pot)
The batterys will last __ depending on your loads and battery bank size. You can add charging from a 240V generator (AC2 input) or from solar with a charge controller wired to the batteries

When the Grid returns, the Invert stops, and battery charge (from the grid) resumes


Is this correct?

1) When the utility is up, the XW6048 acts like a grid tie inverter, including net metering.
2) When the utility goes down, the XW6048 draws from the batteries only, not from the PV panels.
3) The batteries can be charged simultaneously from the PV panels and(?)/or from a generator.


Top
 Profile  
 
 Post subject: Re: newbie questions
PostPosted: Wed Nov 09, 2011 10:29 am GMT EthGMT 
Offline
Guppy
Guppy
User avatar

Joined: Fri Aug 04, 2006 10:24 am GMT EthGMT
Posts: 284
Location: Los Angeles
Is this correct?

1) When the utility is up, the XW6048 acts like a grid tie inverter, including net metering.
2) When the utility goes down, the XW6048 draws from the batteries only, not from the PV panels.
3) The batteries can be charged simultaneously from the PV panels and(?)/or from a generator.


Yep, you've got it.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
cron
Powered by phpBB © 2000 - 2020 phpBB Group

phpBB SEO

© SGT 2002 - 2020 Solar Guppy